Operating instructions

Safety
-7-

2.3 Conventional Use
The controller P40 is for the limited purpose as described in this manual:
CAUTION!
Danger through non-conventional use!
An ELGO position control of the series P40 is not a safe control in
the sense of the norm EN 61508. Safety-relevant shutdowns like
emergency stop cannot be realised with the controller.
Non-intended use and non-observance of this operation manual
can lead to dangerous situations.
Therefore:
 Use P40 only as described
 Strictly follow this manual
Avoid in particular the following uses, they are considered as non-
conventional:
Remodelling, refitting or changing of the devi ce or parts of it with
the intention to alter the functionality or the scope of the position
controller.
Demand due to damage from non-intended use is excluded.
The operator is liable for all damages during non-conventional use.