Operating instructions

Product Features
-9-
4 Product Features

Essential features:
 Single or Two Axis-Controller
 Analogue or digital outputs for 1 - 3 speed operation
 16 free programmable digital in-/outputs (optional 8 digital in-/outputs)
 Program memory for up to 1000 sets



General: The single axis controller of P40 series is
applicable to easy positioning tasks. An important
feature is the easy structured function menu. It
allows a quick and comfortable setting of the target
value, if necessary a specific quantity of desired
pieces.
Target and actual value of the axes plus quantity will
be displayed on the front panel. The keyboard is
simple and user-friendly. With the keyboard the
target and the actual value can be forced and the
positioning can be started.
The P40 series has an internal program memory
for up to 1000 lines. For the positioning two
different kinds of output signals are available:
Switch mode positioning and PID-analogue
output. The P40 series can alternatively be
supplied with 24VDC.




Basic modes of operation:
The P40 consists of three general operation modes:
Manual: Inching operation moves the axes through operating the keypad.
Single: A whole set can be processed.
Program: In the program mode data sets can be strung together or programmed.
This set of records is then processed sequentially. The program consists in this case of
several different data sets.