Technical data
Table Of Contents
- General Information
- Safety
- 3. Transport and Storage
- Product Features
- Technical Data
- Configuration and Functions
- 6.1. Elements
- 6.2. Menu, sections and parameters
- Machine setting
- If the same analog measuring system which is used for the angle also used for the angle Cutting length, then it is necessary, set the values for the cutting length calculation.
- Setting values with minimum angle: Place the cursor in the first row and first column of the table (line: min; column: S. Beg). Now, enter the smallest possible cut angle. Let down the cutting blade to beginning of the cut (till the point, where the upper beam and lower beam of the scissors just touch) and press the F2 key. Now place the cursor on the field in the first row and second column (row: Min; column: S. End) and let down the cutting blade to the end of the cut. Now press the F2 key again. Thus the values for the minimum angle are set up.
- Setting values with maximum angle:
- Place the cursor in the second row and second column of the table (line: max; column: S. Beg). Now, enter the biggest possible cut angle. Let down the cutting blade to beginning of the cut (till the point, where the upper beam and lower beam of the scissors just touch) and press the F2 key. Now place the cursor on the field in the first row and second column (row: Max; column: S. End) and let down the cutting blade to the end of the cut. Now press the F2 key again. Thus the values for the maximum angle are set up.Configuration of inputs and outputs
- 7. Operation
- 8. Interferences
- Maintenance
- Type Designation
- Accessories
- 5 -
Hints and commendations
ADVERT!
...highlights helpful hints and recommendations for efficient and failure-free
operation.
Specific safety instructions
The following symbols in conjunction with safety instructions are used in order to point out possible hazards:
DANGER!
...marks perilous situations by electricity. By non-observance of the safety
instructions the possibility of death or severe injuries exist. The operations have to be
carried out only by an electrician.
General Information
1.3. Statement of Warranties
The warranty conditions are in a separate document.
Guarantee
The producer guarantees the functional capability of the process engineering and the selected parameter.
The period of warranty is one year and begins with the date of delivery.