Installation Guide

5
LIST OF MATERIALS
Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges.
I WARNING
Remove the protective film covering the product before put-
ting into operation.
Supplied Part Pieces Supplied Part Pieces
Hood assembly with blower and
LED lamps already installed
1
Side spacers
2
5x45 mm
4
10” round air transition
1
4x8 mm
10
Parts no supplied
Tools/Materials required
•Level
•Drill
•1¼”(3cm)drillbit
•⅛”(3mm)drillbit
•Pencil
•Wirestripperorknife
•Tapemeasureorruler
•Pliers
•Caulkinggunandweatherproofcaulkingcompound
•Ventclamps
•Jigsaworkeyholesaw
•Flat-bladescrewdriver
•Metalsnips
•Phillipsscrewdriver
Pièces nécessaires
• Câble d'alimentation domestique
• Serre-câble de
1
⁄2" (12,7 mm) (homologation UL ou CSA)
• 3 connecteurs de fils homologués UL
• Bouche de décharge murale ou à travers le toit
corres pondant au système d’évacuation
• Système de conduit d’évacuation métallique
Optional accessories and consumable parts
KIT # Part
EAR628S3, ETR134SS, EAR140S3,
EAR146S3, EAR134S3
in Line Blower
1200 Kit
KIT0154387
External Blower
1200 Kit
KIT0153054