Ventilation Hood User Manual

6
List of Materials
PARTS SUPPLIED:
 Blower unit housing
 Hood canopy
 Metal filter x 1
 Halogen light bulb x 2 (x 4 on EAT E42ASX)
 Duct covers
 Duct Cover support bracket (3 pieces to assemble)
 Hardware Packet:
4x8 screws x 4 (to assemble Duct cover support bracket)
6x70 screws x 2 (to fix duct cover support bracket)
10x60 wall anchors x 2 (to fix duct cover support bracket)
5x45 screws x 3 (2 to fix lower support bracket + 1 to fix blower unit)
6,5x3,5 screws x 8 (to fix hood canopy to blower unit housing)
2,9x6,5 screws x 4 (to fix duct cover)
Allen spanner x 1
Lower support bracket
Tem p l at e
Use, Care and Installation guide
PARTS NOT SUPPLIED
 Duct, conduit and all tools required for installation.
 Ductless Recirculating Kit
to be used only in the Ductless (recirculating) version
includes: charcoal filter, charcoal filter support and fixing bracket, deflector
 Internal blower
To be used only in case of Internal blower installation.
 In-line blower
To be used only in case of in-line blower installation
 Noise reduction sponge
Note: may be already included on internal/in-line blower package.
CAUTION
To reduce the risk of fire and electric shock, install this rangehood only with integral blowers mod. EBI-600A rated 120V
60Hz 450W or with remote blowers mod. EBN-1100A rated 120V 60Hz 900W, manufactured by Elica.