Installation Sheet

5
LIST OF MATERIALS
Removing the packaging.
I CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part Pieces Supplied Part Pieces
Hood assembly and
LED lamps already installed
1
10” round air transition
1
6x80 mm
4
Ø 6.4x11 mm washers
5
6x16 mm
5
Ø 5.3x20 mm washers
2
3.5x9.5 mm
4
10x50 mm wall anchors
2
4.2x19 mm
6
Drip tray bracket
30”, 36”, 42”: 1
48”: 2
Drip tray screws
4
Drip tray
30”, 36”, 42”: 2
48”: 3
Torx 20 adapter
1
Parts no supplied
Tools/Materials required
•Level
•Drillwith1
1
⁄4” (3.0 cm),
1
⁄8” (3.0 mm),
1
⁄16” (4.8 mm) drill bits
•Pencil
•Wirestripperorutilityknife
•Tapemeasureorruler
•Pliers
•Caulkinggunandweatherproof
caulking compound
•Ventclamps
•Saberorkeyholesaw
•Metalsnips
•Screwdrivers:
- Phillips
- Flat-blade
Optional accessories and consumable parts
KIT # Part
30”
(76 cm)
36”
(91.54 cm)
42”
(106.5 cm)
48”
(121.7 cm)
Long Chimney
Extension
Kit 6”
KIT02159 KIT02158 KIT02622 KIT02164
Long Chimney
Extension
Kit 12”
KIT02160 KIT02161 KIT02623 KIT02165
Heat Lamp
w/ 2 - 175W
Bulbs Kit
KIT0142857 KIT0142858 KIT0142861 KIT0142863
Stainless Back
Splash and Warm
Racks Kit
KIT0142864 KIT0142867 KIT0142868 KIT0142870