Installation Instructions

5
List of Materials
Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING!
Remove the protective film covering the product before
putting into operation.
• Hood canopy assembly with blower, transition.
• Lamp already installed.
• Grease filter.
• Glass Canopy
• Duct cover.
• Hardware bag with:
• Plastic Gasket.
• Template.
• Duct cover support bracket (1 piece)
• Use, care and installation guide
• Glass bracket (2 pieces)
• Wood screws (6 pieces - 3/16" x 1" 3/4)
• Hood attachment anchors screws (6 pieces - 1/8" x
3/8")
• Assembly screws (8 pieces)
Parts not supplied
Optional Accessories
• Ductless Recirculating Kit
To be used only in the Ductless (Recirculating)
version
includes: charcoal filter, charcoal filter support and
fixing bracket, deflector
Tools/Materials required
• Wire nuts
• Tape to mount template
• 8" rounded metal duct length to suit installation
• Measuring tape
• Pliers
• Gloves
• Knife
• Safety glasses
• Electric drill with 5/16” and 3/8” Bits
• Strain relief
• Spirit level
• Duct tape
• Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
• Wire cutter/stripper
• Masking tape
• Hammer
• Saw, jig saw or reciprocating saw