Installation Instructions
19 
USING THE HOB 
Before you begin, it is important to know: 
All functions of this hob are designed in order to comply with 
the most stringent safety regulations. 
For this reason: 
•  Some functions will not be activated, or will be 
automatically deactivated, in the absence of pots on the 
burners or when they are poorly positioned. 
• In other cases the activated functions will be automatically 
deactivated after a few seconds when the specific function 
requires a further setting that has not been selected (e.g.: 
“Turn the hob on” without “Selecting the cooking zone” and 
the “Operating temperature”, or the “Lock Function” or the 
“Timer” function). 
 Warning! In the case (for example) of prolonged use, 
the cooking zone may not immediately shut down because it is 
in the cooling phase; the "" symbol will appear on the cooking 
zone display “
” to indicate the execution of this phase. 
Wait for the display to turn off before approaching the cooking 
zone. 
Cooking zone display 
the cooking area display indicates: 
Cooking zone on 
Power Level 
 …   -   
Residual Heat Indicator 
Pot Detector 
Temperature Manager Function 
active 
Child Lock Function active 
Pause function 
Automatic Heat UP function 
Hob characteristics 
 Safe Activation 
The product is activated only in the presence of pots on the 
cooking zone: the heating process does not start or is interrupted if 
there are no pots, or if these are removed. 
 Pot Detector 
The product automatically detects the presence of pots on the 
cooking zones. 
 Safety Shut Down 
For safety reasons, each cooking zone has a maximum operating 
time, which depends on the maximum power level set. 
 Residual Heat Indicator 
When one or more cooking zones shut down, the presence of 
residual heat is indicated by a visual signal on the corresponding 
zone display, by way of the "" symbol. “
” . 
Operation 
Note: Before activating any functions, the desired zone must be 
activated 
 Power-on 
Press (touch)   ON/OFF hob/ extractor 
The indicator light will turn on to indicate that the hob/extractor is 
ready for use 
Press again to turn off 
Note: This function has priority over the others. 
 Selecting the cooking zone 
Touch ON/OFF(22), press the Selection bar (3) corresponding to 
the desired cooking zone. 
 9 Power Levels 
The hob features 9 power levels 
Touch and scroll along the Selection bar (3): 
to the right to increase the level of power; 
to the left to decrease the level of power. 
 Power Booster 
The product features a supplementary power level (after level  ), 
which remains active for 10 minutes, after which the temperature 
returns to the previously set value. 
Touch and scroll along the Selection bar (3) (after level 
) and 
activate the Power Booster 
The Power Booster level is shown on the display of the selected 
zone with the symbol" 
” 
 Bridge Zones 
Thanks to the Bridge function, the cooking zones are able to work 
in a combined manner, creating a single zone with the same 
power level. This function allows evenly distributed cooking with 
large-sized pots and pans. 
The front “Master” cooking zone can be used in combination with 
the corresponding “Secondary” cooking zone at the back 










