Use, Care, and Installation Guide

Filter saturation indicator

The hood indicates when filter maintenance is needed:

Grease filter

the

“ ”(17) LED lights up

Activated carbon odour filter

the

“ ”(17) LED flashes

Reset filter saturation

After carrying out maintenance on the filters (grease and/or activated carbon) hold

down the

key;

the

“ ” LED turns off and the count restarts.

Activation of activated carbon odour filter saturation indicator

This indicator is normally deactivated

To activate it, proceed as follows:

- turn on the aspiration hob by pressing

;

- with the aspiration motor and cooking zones off, press and hold

;

“ ” turns on, then off to indicate successful activation.

Deactivation of activated carbon odour filter saturation indicator

repeat the activation steps described above

“ ” flashes, then turns off to indicate successful deactivation.

Automatic mode

The hood will turn on at the most suitable speed, adapting the extraction capacity

to the maximum cooking level used in the cooking zone.

Once the hob is turned off, the hood adapts its aspiration speed, gradually

decreasing it, so as to eliminate residual vapours and odours

To activate this function:

Briefly press

(7), the LED " " (18) will light up to indicate that the hood is

working in this mode.