Use, Care and Installation Guide

7
ELECTRICAL CONNECTION
WARNING: All electrical work must be performed
by a qualified electrician.
Please ensure that the appropriate electrical
codes or prevailing local building codes and
ordinances are adhered to.
Ensure that the electricity supply is
disconnected at source. Do not use an extension
cord or adapter plug with this appliance.
This appliance must be grounded. Connect to a
properly grounded branch circuit, protected by a
15 amp circuit breaker.
Electrical Supply.
This appliance requires 120V/60Hz, 3amp
electrical supply – ensure an appropriately
qualified person completes the electrical hook-
up. The connection point for the electrical
supply is at the top of the unit, therefore the
electrical supply must be run down from the
ceiling alongside the ductwork.
All electrical and venting hook-ups must be in
place before commencing installation of the
hood-fan.