Table of Contents Elicom Electronic Ltd. Electronic Scales E V Lplus Models T and M Page 1. Warranty card ............................ 3 2. Brief description ....................... 4 3. Main functions........................... 4 4. Technical data ........................... 4 5. Scale Overview.......................... 5 6. Preparing for use ...................... 6 7. Installation instructions............ 7 8. Operation modes ...................... 7 8.1. Weighting Mode...............
Scale Models Series EVLplus EVLplus xx LТ3 EVLplus xx LМ6 EVLplus xx BТ3 EVLplus xx BМ6
Elicom Electronic Ltd. 1.
Owner’s Manual 4 2. Brief Description The electronic scales from series EVLplus xx LM, LM, LT, BT, are precise measuring devices for determining the weight of goods in retail stores and warehouses. All scales from series ELVplus are designed to work in temperature range from -10°C to +40°C and to work without external power supply for up to 100 hours.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 5 4.2.
Owner’s Manual 6 2. 3. 4. 5. 6. 7. 8. 9. Metal Platter - the measured loads are placed on top Plastic lid cover - covers the electronic unit and the load cell unit. It protects the keyboard, operator’s (8) and customer’s (7) display. The following information is also placed on the cover License registration Indications for state control Leveler - for the scales to be horizontally placed adjust the legs (5) till the bubble in the leveler indication stabilizes in the middle of the readout.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 7 Scale Metal platter AC adaptor Operation Manual Passport Warranty card 2. Installation of the metal platter – place the tray legs in the corresponding holes on the upper side of the scale. Sway it gently until it finds a stable position. 3. Place the scale on a flat surface (table). Level the scale by screwing the adjustable legs and constantly keep an eye on the bubble in the left side indication.
Owner’s Manual 8 Model: LM, BM 8.1. WEIGHING Mode Place the load and wait till the scale stands still or until the indication for total price or the load indication blinks repeatedly. 8.1.1 Keyboard keys 1. 2. 3. ON/OFF – Turn on/off the scale. Turn off with this button lessens but doesn’t stop the energy supply from the adaptor. It’s recommended to unplug the adaptor from the main supply once the work is done.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 4. Keyboard keys 9 00 , 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , C .are used in the Weighing mode for entering article prices. Wrong figures are deleted by pressing the C button and the price setting starts from the beginning. These buttons are also used to call out the previously set article prices. In this case only two figures are entered after which the PLU button is pressed and the figures are considered as article numbers: 01, 02...89, 90…..
Owner’s Manual 10 1.700 2.80 ___4.76 If the price is wrong it can be deleted it by pressing the C key. Correct the figures by entering 2 , 5 , 0 The total price is calculated and indicated. 0.000 2.50 ____.__ Remove the load from the platter – in the Price per kg field remains the last price entered.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 11 NET 0.150 1.20 __0.00 0.200 1.20 __0.24 If there is a previously set Tare for PLU 3. The Tare will be deducted from the load and only the net weight will be indicated. The “NET” sign shows that there is a previously set Tare for the corresponding PLU and only the net weight is shown. Т After the load is removed the Tare is shown with a negative sign and the “T” symbol is shown in the left part of the display. 8.1.4.
Owner’s Manual 12 NET 0.000 3.00 __0.00 Enter price per kg of 3.00 (Example) and remove the pot. NET 1.280 3.00 __3.84 After the pot is full, it is placed on the platter The display shows the net weight of the weighed product with the total price calculated. The “NET” sign shows that the scale works with Tare and at the moment is shown the net weight. 0.426 3.00 __0.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 0.426 3.00 __0.00 0.000 3.00 __0.00 Т The Т 13 key is also used to clear the Tare value. To clear the Tare, the scale must be unloaded. Note 1: The following steps are performed for accumulating of the Tare value: 1. Set the Tare and place the first product as described above. 2. Press the T key, the scale shows the current Tare. 3. Press the T key for a second time – the scale zeros the Tare and shows the total weight 4.
Owner’s Manual 14 0.000 __._6 ___.__ -Р- _6 0.25 ___1.5 0 To add a number of fixed price articles to the customer’s bill (For example: 6 onions by 0.25 Enter the price by pressing the 2 each). C , 6 press the * - This combination is used to set the number of peaces sold. Press the + , 5 keys. to add the sale to the customer’s bill. 8.1.5.2. Accumulated totals to the client’s bill. By pressing the MR the scale is switching in mode to view the Customer’s Bill. totAL ----2 5.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 With the 1.900 2.10 ___3.9 9 MR are reviewed all of the sales 15 -Р- .__6 2-- 2 ___1.5 0 recorded in the client’s bill. -Р- .__6 0.25 ___1.5 0 totAL --- ___5.49 To go back to “Weighing Mode” press the “C” or “CP” keys. 8.1.5.3 To delete a particular sale, choose the desired sale by pressing MC key two times. When deleted the display shows the previous sale. MR .
Owner’s Manual 16 To delete sale #1: 1.900 2.10 ___3.9 9 Use the MС and MС keys to delete a sale. -Р- .__6 1-- 1 ___1.5 0 After the delete is shown the next sale in the client’s bill. The total number of sales is now 1. 8.1.5.4. To delete a Customer’s bill. Press MR to go to the following screen: 0.000 0.00 ____.__ totAL ----2 ___5.49 Use the MС and MС keys to delete all sales and the Customer’s bill.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 17 To go back to WEIGHING MODE use the C or CP keys 6.590 PLU . ° __20.00 On the first line is shown total weight, on the bottom line is shown the total turnover at the moment. 6.590 PLU . ° __20.00 To clear the “Register of Sales” press the MC key two times, when the “Register of sales” mode is entered. 8.2. COUNTING Mode 0.840 PLU 001 __2.56 Use the MR key to switch the articles on which there are accumulated sums.
Owner’s Manual 18 8.2.1 Activating from Service mode 2. Press PRG, DW after that press the PRG key rapidly till the “cnt 0” is shown on the display. By pressing the C key from the numeric keyboard change the blinking „0” to „1” .Press СР to exit. 8.2.2 Before you start work, place an exact number of details, you want to count and define their exact number. For the next weighed details, this particular load will be used to define their exact number.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 2. 3. 4. As a result on the middle line of the display is shown „0”, on the weight line is shown „0.000” and „base” Place the “Basic number of details” and enter their number by the numeric keyboard. The entered number will be displayed on the “Price per unit” line. By pressing the PRG key, the number and the weight are set and the scale is in “Counting mode” of the details bASE 20 5. 6. 19 1.
Owner’s Manual 20 d. e. After the readout is stabilized press PRN measurement Remove the load and place the next one….. to print the label and to record the 8.3.2. Label print by using the keyboard to enter a number of particular article. Method of work: • Enter the number of articles by using the numerical keyboard • Press * . • • Enter the price per unit or the PLU number Print by pressing PRN 8.3.3. Print of group label when working with weighing or counting products.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 Double click PRG . By continuous pressing of the PRG functions of the mode.
Owner’s Manual 22 0.000 0.00 ____.__ PRG , PRG - switching to programming of articles (in detail p. 8.4.3). This function is available only for price computing scales b 6.41 _.__ ____.__ PRG – Voltage of the battery (6.41V). Described in p.8.4.5. battery check 0.000 0.00 PL1775 The first mode is „Programming of price and tare” – described in detail in p.8.4.3. CALIb 3 ___.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 o4P50 PRG - software version 23 A0f00 PRG - AUTO OFF – by using the numerical keyboard is set time after which the scale automatically turns off. When turning the scale on after AUTO OFF, no initial test is preformed Au0-2 PRG - Au0-0 – Automatic checking for Zero (0). For value =0 automatic checking for Zero is Disabled; For value =1, negative shifts are Enabled; For Value =2 positive and negative shifts are Enabled. CALIb 3 ___.
Owner’s Manual 24 SP.104 SP.200 PRG - Parameter for work with Scanner By pressing PRG PRG – Parameter for work with scanner the scale is going back to “WEIGHING Mode” From each function of the Service Mode you can switch to “WEIGHING Mode” by pressing CP . 8.4.2. Switching to “Service mode 2” In WEIGHING Mode press PRG followed by DW . For setting the parameter are used the keys 0 .. 9 , C ; PRG – for switching to next parameter, CP – for switching back to WEIGHING Mode.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 rtC PRG 151008 1410 – Setting-up the clock for real time. Use 25 Е3nr 00 PRG - Counter number PRG set of the date and the time ≡ nbr 00 PRG - Operator’s number °nbr 00 PRG - Logical number of the scale in LAN network Print noAuto PRG - Enable/Disable automatic print of labels – To change use C .
Owner’s Manual 26 cLiEnt ____.__ PRG – Enable/Disable function CLIENT’S BILL P1 000000 ____.__ PRG - party number 1 – To change use C . P2 000000 P3 000000 ____.__ ____.__ PRG - party number 2 PRG - party number 3 * The access to the parties numbers can be obtained in WEIGHING Mode with unloaded scale by pressing PRG followed by the PRN. rELAb0 ____.__ PRG – Enable/Disable function Pre-labeling – to change use C . cnt 1 ____.__ PRG – Enable/Disable COUNTING MODE – to change use C .
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 0.000 0.00 ____.__ PLU 1 ____.__ PRG – switching between article by number PLU (PLU1) or article by article’s number (Art1) – 27 PRG - going back to WIGHING Mode to change use C . For in detail description how to use PRE-LEBALING function, see p.8.3.4; For COUNTING FUNCTION, see p. 8.2 8.4.3. Setting articles (for price computing scales) To switch to this function, double click PRG in WEIGHING Mode.
Owner’s Manual 28 0.000 0.000 6.00 PLU121 PLU121 1 , 2 , 1 - switch to article № 121 by entering the 3 digits! PLU – To confirm the entered number. As a result is shown the set price and tare of the article PLU121 and the price is blinking. 0.000 4.75 PLU121 1.050 4.75 PLU121 Enter the desired price. For example: 4.75. If you desire to save a tare for The value for Tare is displayed with negative this PLU, place the box (tare) and press Т.
Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1 b-6.11 PRG , PRG , PRG – battery status. If the adapter is connected to the scale the sign „ – „ is changing consecutively: - = ≡ - showing that the battery is charging 29 batLO If battery is Low, the following message is displayed: “batLO” After the message “batLO”, the display is turning off automatically. When working without adapter the dropping of the voltage is displayed by a battery icon in the left part of the display.
Owner’s Manual 30 0 1 2 3 4 Speed, [baud] 4800 1200 2400 4800 9600 Second digit 0 1 2 3 4,5 5 19200 6 6 7 38400 4800 7,8 9 First digit Protocol Electronica КА ORGTECHNICA КА Еlka 752, Datecs КА Karat, Deisy, Bimco scales КА Eltrade Protocol with continuous dispatching of the weight Connection with PC, PRN Scales Angel, CAS, DIBAL For example: CASH 02 means speed 4800 for cash register Е752 or Datecs.
HEAD OFFICE 7500 Silistra, Bulgaria 5, Saidinenie sq. PO Box 188 Tel.: +359/ 86 /820 200, 882 255 Fax: +359/ 86 /820 555 e-mail: info@elicom-bg.com OFFICE AND SERVICE 1784 Sofia, Bulgaria 131, Tsarigradsko shosse, "ATM Center", fl. 4, office 403 Tel.: +359/ 2 / 974 4391 Fax: +359/ 2 / 974 4391 e-mail: elicomsf@elicom-bg.com www.elicom-bg.
