Elicto MODEL NO.
Contents 2 ◆ Safety Attentions............................................. ...3 ◆ Name of components and structure…………………5 ◆ Item installation methods…………………………… ◆ Correct installation methods for cleaning…………… 8 ◆ Washing attentions of cleaning pads………………… 8 ◆ Troubleshooting ……………………………………… 9 ◆ Warranty………… ...................................................
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR ES-500 Corded. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Do not use outdoors. » Do not allow to be used as a toy. Close attention is necessary when used by or near children. » Do not use for any purpose other than described in this User’s Guide. Use only manufacturer’s recommended attachments.
Safety Precautions In order to avoid injury and damage, please read the precautions carefully. Please use the product as described in the manual. This product is intended for inside cleaning-Do not use this product outdoors. Warning Failure to follow instructions can lead to injury or death. Please read carefully to avoid any danger. Do not use if the power cord is damaged. Please check whether the power cord and plug is damaged or burnt. (May cause electric Don’t touch the plug or switch with wet hands.
Name of components and structure Handle Water spray button Rotating button Cord rewinder Connectable tube Major fixed pin of connectable Power light Power Function light Major Body Spray outlet Cleaning pads Water inlet InstructionManual Cleaning pads Measuring cup IM 5
Item installation methods ► When installing,please connect with power,may cause the product barrier or electric shock. 1. Please take the handle and the major body from the packing box. 2. 3. You will hear a clicking sound and the metal ball should be visible if it is inserted correctly. of the handle, insert two AAA baterries and close cover. a clicking sound. Metal ball should be visible in the hole.
Using Your ES-500 Please follow the instructions below. 1. When cleaning, let the mop heads absorb water and ring it out completely. 2. Fix the clothe pads on rotating plates. 3. Make sure to align the center of the mop heads with the center of the rotating plates correctly. 4. Before cleaning, make sure there are 5. Push the GRAY button located on the main unit to power on. LED light should light up. 6.
Correct Installation of Mop Head The center of pads and rota ng plate should match up correctly. Washing Your Mop Head 1 When machine washing, please le it absorb some detergent before washing. When washing, please remove any foreign objects left on the pads to avoid damage . 8 After soaking in 40’C water, put in moderate detergent and wash. When washing, considering the absorption of water, sanitatiaon and pad structure, suggested to wash alone. 1 After wash, let the mop heads dry.
Electronic Spin Mop and Polisher ES-500 110-120V 10 9
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact ELICTO Consumer Care by E-mail, telephone, or regular mail as described below.