Installation Guide

Aiandi 13/1 | Tallinn 12918 | Estonia
Tel: [phone] | [e-mail] | www.eliko.ee
12
a. Layout plan
Click the “Start setting up the system”
button on the “Welcome” page. You can see
the “Plan conguration” panel on the right
side of the page and an interactive window
on the left. You can start by uploading the
plan image. If you don’t want to use plan
at the moment, you can just click the “Set
Anchors” button to move forward to the
anchor’s conguration page.
Figure 7. View of the Eliko RTLS Manager front page.
6. CLIENT NETWORK
If you connect the Eliko RTLS Server’s
“Client Network” port to your company’s
network router, you need to make sure your
network has a DHCP server running. After
the Eliko RTLS Server has obtained an IP
address from your network, you must iden-
tify this address. Usually, this can be done
by accessing the admin page of your net-
work router. Look up the Eliko RTLS Server
IP address under the name “KIO-RTLSS”.
The Eliko RTLS Manager can be accessed
from your network by using a web browser
to access a URL like http://10.10.10.10
(replace 10.10.10.10 with the IP address
your network has leased for the Eliko RTLS
Server).
7. ELIKO RTLS MANAGER
Go to the previously obtained server IP
address to access the Eliko RTLS Manager
using any browser. Read and accept the
Eliko RTLS EULA. Now you are ready to start
conguring the system.