Instructions / Assembly

Elima-Draft ®
INSTALLIATION OF 24” X 30” RETURN BLANKET
1. Remove return filter in your ceiling or wall grill.
2. Open the Elima-Draft Return Blanket and place the return filter on top of it.
3. With a pencil, mark outer area around return filter on the Return Blanket.
4. Using a scissor, cut pencil line as drawn
5. Attached the six-double sided sticky tape squares on your return filter. Three on each of
the long sides; if your return filter is rectangular. If your return filter is square, then place
one double sided sticky tape in each corner.
6. Attach the Elima-Draft Return Blanket, white side showing onto your return filter where
the sticky sided tape is located.
7. Press firmly to insure the Return Blanket is attached to the return filter.
8. Place Return Blanket & return filter together as one, back into your grill and close.
Phone/Fax: [phone]
www.elima-draft.com
12 Technology Dr.
Suite 12-15
Setauket, NY 11733