User Manual

ELB 1200
Quick Start Guide
ERROR MANAGEMENT ELB1200 BATTERY PACK INFO
DOWNLOAD THE ELB 1200 USER GUIDE
DOWNLOAD CONFORMITY
is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
Elinchrom LTD - ELB 1200 - Made in Switzerland - 07.2017 (73051)
Elinchrom LTD - ELB 1200 - Made in Switzerland
Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: [phone] E-mail: [e-mail]
www.elinchrom.com
Please check all security documents before use !
Error
number
Desription Solution
-1 Capacitors over voltage Restart -> Service
-2 System overheat Wait until cooling down
-3
System tries to discharge capacitors but
something is broken/damaged
Restart -> Service
-4 Charge Timeout
-9
No input voltage on SMPS ! Critical error on
the system because connection board is
not working
-15 Charge MOS thermistor open
-18 Discharge MOS thermistor open
-19 Capacitor thermistor open
-24 Capacitor voltage symmetry error
OFF 10 min. Restart ->
Service
-26 Booster voltage error
Restart -> Service
-28 Tube hanged
-60 System peripheral bus error
-62 System memory error
-99 Uncategorized error
-101
Show to customer a warning for low
battery level
Warning
Battery level button
• Press short to see the charge level of
the battery.
• Press about 3 seconds to activate the
USB charge socket for mobile devices. If
nothing is connected, the usb socket will
deactivate after 30 seconds.
Please get the complete user guide at this link:
http://bc.gs/elb1200
www.elinchrom.ch/support
Please find the declaration for EC conformity and USA &
Canada conformity on the Elinchrom website.
http://bc.gs/ec
1. Safety Mode / Reset
• To deactivate the Battery for travelling,
press the RESET button for about
6 seconds, until the 4 green LED’s
switch off.
• To activate the battery, press the
battery button 2 seconds, the 4 green
LED’s will flash 4 times to indicate that
the battery is activated now.
2. USB socket output (5V, 1A)
Charger supply socket
Locking mechanism
1
2
Press down to lock Press up to unlock Grab and pull
to open and separate
the battery from unit