Specifications

Reset
RESET A / CHANNEL RESET:
To reset the learned channels back to the channels last set in the Utility, hold TEST as you power on the ash. The
Status LED blinks green twice to indicate a reset. Release TEST. Advanced features set via the Utility are retained.
RESET B / FACTORY DEFAULTS:
To reset all advanced features and channels to FACTORY DEFAULTS, press and hold TEST before you power on the
ash, continue to hold TEST as you power on the ash, and do not release TEST for about 10 seconds. When the
Status LED blinks green 4 times, release TEST.
PowerST4 PocketWizard Utility Defaults:
• Channel = ControlTL Channel 1
• Exposure Compensation = +/- 0.0
• Flash Idle Time Out Mode/Delay = Enabled at 600 Seconds (10 minutes)
P
owerST4 radio information (RECEIVE ONLY):
340.00 – 354.00 MHz, US FCC/IC
433.42 – 434.42 MHz, CE
IMPORTANT: US FCC/Canada frequency radios are NOT compatible with CE frequency radios or Japan frequency
radios and vice versa. For more information on frequency, please go to:
www.PocketWizard.com/wheretobuy/frequency
Temperature
Operating Temperature: Above -15° C (5° F) and below 50° C (120° F)
Storage Temperature: Above -30° C (-22° F) and below 85° C (185° F)