Instruction Manual

5
Changing Protocol Information
English
3. CHANGING PROTOCOL INFORMATION
The DIP switches on the bottom of the camera control 3 values:
1. The ID of the camera, which allows the DVR/keyboard controller to
identify different PTZ cameras.
2. The pr
otocol, which is the language that allows the camera and DVR/
keyboard controller to speak to each other (e.g. Pelco D).
3. The baud r
ate, which is the frequency of communications.
The illustration below shows the default values of the DIP switches.
Default ID: 1
Default Baud Rate: 2400
Default Protocol: Pelco-D
eLineTechnology.com