User guide
19 20
Configuration
3. Under
Download unsigned ActiveX controls
,
click Prompt
(recommended) or Enable.
Select Enable or Prompt under
Download
unsigned
ActiveX
controls
Click
OK
4. Click
OK
.
Click
OK
again to
save
changes.
Step
2 of 2:
Log into
camera:
1.
Connect
the camera to your
l
o
c
a
l
network and find the camera’s
IP
address.
See
“4. Finding the Camera’s IP Address” on
page 9.
2. Enter the camera’s IP address in the address bar in the
f
o
ll
owing
f
o
rmat:
http://
http://192.168.0.120:80
IP address
Colon
HTTP
port number
NOTE:
You
can also connect to the camera using a
DDNS
address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on
page
12
for
det
a
ils).
3. Under User Name and
Password
,
enter the camera’s User
Name
(default:
admin
)
and Password (default:
admin
)
and click Login.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Configuration
4. If your computer has Flash Player ins
t
a
ll
ed,
the main screen
for the
camera web interface
opens.
From here youcan view and configure the
ca
m
e
ra
.
NOTE:
The ActiveX
plug-in
may
provide smoother
video
performance than
Flash Player.
To
use
ActiveX,
click the
message above
the
video
window.
Then
click inside the
video area,
select
Install
this Add-on for
all
users
on
this computer
,
and follow the prompts.
Install
ActiveX
plug-in
NOTE:
If your computer
does
not
have
Flash Player ins
t
a
ll
ed,
you will be
prompted
t
o
select if
y
o
u would like
t
o
use Activ
eX
or Flash
Play
er
t
o
connect
to the
ca
m
e
ra:
•
Click
to
play
live
video
with
ActiveX control
to
reduce
latency
(recommended):
Uses
an
ActiveX
plug-in to connect to the camera. To
install the plug-in, click on the
video
area,
and
select Install
this
Add-on
for all
users on this computer
,
and follow the prompts.
•
Click
to
download
the latest
version
of
Flash
Player to
play
live video:
Opens
a link to download Flash Player from
Adobe’s
website.
After
completing the installation, restart your browser and reconnect to the
camera.
Select
ActiveX
or Flash Player
eLineTechnology