User guide
23 24
Configuration
6.5
Device
Info
The Device
Info
page
shows information about your IP camera, such as the
Device
Name (which appears in the
Device
List in
NVMS),
firmware
version,
MAC
address, and camera inputs and outputs.
You
can also
configure the
Device
Name for your camera.
ATTENTION:
The device
ID is unique.
Do
not
change
it unless your
installation has special requirements.
To configure
the
Device
Name:
1. Click
Device
Info.
2. Under
Device Name
,
enter the desired
device
name and then click Set.
Configuration
6.6
Stream
Configuration
The
Stream Configuration
page
allows you to configure the camera’s video
streams.
The
camera supports three different
video
streams. This allows
you
to
have a
high quality recording stream (stream1),
a
lower quality stream
(stream2) to preserve bandwidth for remote connections, and an MJPEG
stream for applications requiring MJPEG.
To configure video streaming
settings:
1. Click Stream
Configuration
.
Under Stream ID, select the stream you
would like to
c
o
nfigur
e.
2. Configure the
f
o
ll
owing:
•
Video Encode Type:
Select the
Video Encoding
type for the stream.
Stream1 and stream2 can be configured for
H.264 High
Profile, H.264
Main
Profile, or
H.264 Base
Profile. Stream3 supports
MJPEG
only.
•
Audio Encode Type:
Select the Audio
Encoding
type for the
stream:
G711_ALAW
,
G711_ULAW
,
or RAW_PCM.
•
Resolution:
Select the resolution for the stream. Stream1 and stream3
can
be
set to
1920x1080
or
640x360
. Stream2
can only
be
set to 640x360.
Stream3 can only be set to 1920x1080.
eLineTechnology