User guide

31 32
Configuration
• Cus tom: Create a custom OSD message. Enter thecustom OSD text under
Custom OSD.
Device Name
Channel ID
Channel Name
Time
Custom
3. Enter the desired Row and Column for enabled OSD messages. Text on
row 0 is shown at the top of the screen, and moves down as the
r o w
number increases. Text on column 0 is shown on the
left side of the
screen, and moves right as the column number increases.
Column 0
Column # increases
Row 0
Row #
increases
4. Click OK to update the camera OSD.
6.7.6 Microphone
Configuration
Configure microphone settings for listen-in audio. Self-powered
microphone required (not included).
To configure microphone settings:
1. Click
Device Configuration>Microphone.
2.
Check Enable Microphone to enable listen-in audio or un-check t o
disabl
e.
3. Under
Microphone Volume , select the volume for the micr ophone
between 1~100.
4. Click
OK to save changes.
6.7.7 BNC Video Output
Under BNC Output ( Device Configuration>BNC Ouput ), select On to enable
analog output or
Off to disable and click OK.
6.7.8 Language
Change the language for the camera OSD display (e.g. time and date display)
and email alarms. Supported languages are English, Polish,
Russian, and
Chinese.
eLineTechnology