User guide
45 46
Configuration
•
Password:
Enter the
Password
you have set on the account.
4. Click
OK
to
save
settings.
6.12
Service
Center
Service
Center contains the following sub-menus:
•
SMTP
•
Alarm Center (not supported currently)
6.12.1 SMTP (Email Alert
Setup)
The SMTP
sub-menu allows you to configure email alerts when motion
alarms occur. Email alerts
will
include a .jpg snapshot attachment.
Before setting up
email alerts
you must configure
the following:
•
Motion alarms must
be
enabled
before the camera will
send
email
alerts.
See
“6.8.2 Motion Alarm” on
page
34.
•
A static IP address must be configured for the camera and
DNS
servers
must be entered.
See
“6.7.1 Local Network” on
page
26.
Configuration
To enable
email alerts:
1. Click
Service
Center>SMTP
.
2.
Check
Enable
SMTP.
3. Configure the
f
o
ll
owing:
•
SMTP
Server
Address:
Enter the address for your
SMTP
server.
•
SMTP
Server Port: Enter your server’s
SMTP
port number.
•
User
Name:
Enter the
SMTP
account user name.
•
Password:
Enter the
SMTP
account password.
•
Sender
E-mail
Addres
s:
Enter the email
address
that will
be
used
to send
email
alerts.
•
Recipient
E-mail
Address
1~5: Enter up to 5 email addresses that
will
receive email
alerts.
•
Attachment Image Quality:
Select the quality of the image attachments:
High
,
Mid
,
or
Lo
w
.
•
Transport Mode:
Select the encryption type used by the server
(
SSL
or
STARTTLS
)
or select
No encrypted
if your server
does
not
use
encryption.
4. Click
OK
to
save
your settings. Click
Send
testmail to send a test email
alert.
6.13
Privilege
Manager
Privilege Manager allows you to configure user accounts and user groups.
Privilege Manager contains the following sub-menus:
•
Group
•
User
eLineTechnology