User guide

49 50
Configuration
To add a user account:
1. Click
Add . The Add User window appears.
NOTE: If the Add User menu does not appear, disable any popup bl ock er s.
2. Enter a User Name and Password for the account and repeat the
password under Confirm.
3. Under
Group , select the desired user group for this account.
4.
Check Multi Login to allow the user account to l o g into the IP c a mer a
from multiple l o c a tion simultaneously or un-check to limit the account t o
a single l o c a tion at a time.
5. Click
OK to save the new user account.
To modify a user account:
1. Select the user account under User and click Modify.
2. Modify the account details as
needed and click OK.
To delete a user account:
• Under User , select the user account and click Delete . Click OK to confirm.
6.13.3 Unlocking User Accounts
The admin account is the only account that can unlock user accounts that
have been locked out. User accounts are locked out if the wrong password is
entered 3 or more times.
To unlock a user account:
1. Login to the camera as admin.
Configuration
2. Click Privilege Manager>User .
Select the
user
Click Unlock
3. Under User , select the l o ck ed user account.
4. Click
Unlock to unlock the account.
6.14 Protocol
Protocol contains the following sub-menus:
• Protocol
• Security (Not supported)
NOTE: Do not check User V erific ation in the Security sub-menu, as it may
block
ONVIF software from detecting the c a mer a.
6.14.1 Protocol
The Protocol page (Protocol>Protocol) allows you to view ONVIF protocol
settings.
6.15 Device Restart
Click Device Restart . Click Restart then click OK to restart the camera.
eLineTechnology