User guide

51 52
Configuration
6.16 Default Settings
Click Default Settings . Click Restore then click OK to restore the camera to
factory default settings.
The camera will reboot.
6.17 Sensor Configuration
The Sensor Configuration menu is used to adjust camera image settings.
To configure camera image settings using the Sensor Configuration menu:
• Log into the camera using a web browser, and from the Live Video page,
right-click on the video area and select Sensor Config.
Right-click in the video area
and select Sensor Config
Configuration
• Click Save to save setting changes.
• Click Reset to revert to the last saved changes.
• Click Factory Setting to revert all camera sensor settings to factory
defaults.
• Click Cancel to exit.
TIP: Hold the mouse over the tabs to see the full name of the tab.
6.17.1 Image Adjust
Adjust the Brightness, Saturation, and Contrast settings for the image.
6.17.2 Shutter Control
Adjust the camera shutter settings.
• ShutterMode: Select AutoShutter or FixedShutter.
eLineTechnology