User guide
57 58
Configuration
6.17.10
Mirror
Enable/disable image
mirroring.
•
Mirror: Select
Horizontal
to mirror the image horizontally, Vertical to
mirror vertically, or
Picture Flip
to mirror both horizontally
and
vertically.
Select
Close
to disable image
mirroring.
6.17.11 Noise
Filter (solution may not feature this setting)
Configure noise filter settings.
•
Noise
Filter: Select
Auto
for automatic noise filtering or Manual.
•
Max Level:
Select the maximum level for automatic noise
filtering.
•
Level:
Select the level for manual noise
filtering.
to
7.
RESETTING TO FACTORY
DEFAULTS
Follow the steps below to revert all settings to factory defaults.
The
camera
must be connected
to
power
to perform a
factory
reset.
1.
Remove
the camera access
c
o
v
e
r
screws
(2x)
and
camera
cove
r
. Cover is hinged
2. Press and hold the
whit
e
reset button
for
5 seconds
then
r
e
l
ease
the button
t
o
reset the camera to
f
a
ct
ory
def
aults.
3. Re-attach the camera
c
o
v
e
r
and replace the
c
a
mer
a
cove
r
screws (2x).
NOTE:
Make
sure rubber seal is
firmly in place when replacing
the camera cover.
eLineTechnology