Setup User’s Manual
eLine Sniper Camera Setup Manual eLineTechnology.com Tips： Network cameras on the market a variety of different options. Between the software may not be the same, or even incompatible.This manual is only suitable for the use of the products in this series. To ensure your safety, proper use of this product, read this manual carefully before you start using. Any installation or operation problems, please contact our technical support.
eLine Sniper Camera Setup Manual eLineTechnology.com SETUP TABLE OF CONTENTS ........................................................................................................................ - 1 - <1> HARDWARE INSTALLATION ...................................................................................................... - 2 <1.1> NETWORK CONNECTING THE CAMERA DIRECTLY IN THE PUBLIC DOMAIN。 ............................................ - 3 <1.
eLine Sniper Camera Setup Manual eLineTechnology.com If you only use the LAN, you do not need to do special network settings, is a "plug and play" hardware. As used in the Internet (Internet), refer to <4> Set network. Average user network environment has the following two. Any special requirements, please contact network technology service providers. <1.1> Network Camera is directly connected to the public domain. First network camera used pairs of wiring is connected to on the computer.
eLine Sniper Camera Setup Manual eLineTechnology.com Refer to the following diagram to connect the way, depending on the settings of the local area network, online network camera is set to DHCP to automatically obtain IP or Static IP Static IP (reference <4> to set up the network) Internet.
eLine Sniper Camera Setup Manual eLineTechnology.com <2> Install application software <2.1> Setting interface (Setup software) Click on the right side of the middle run Setup "to enter the local monitoring and setting interface. 3 1. In the lower right corner of the camera name on the list, it will automatically search all available in the LAN network camera name.Said, and in different colors to distinguish between different feature set.
eLine Sniper Camera Setup Manual eLineTechnology.com Dserver:The address of the server registered by the registration server cameras are watching。 3. LAN monitoring "Camera Name" list, double-click the the viewing device name, the device name will change to red. User can always double-click the name of any device, to watch the real-time screen. The LAN can people watch the same or different devices at the same time. 4．Camera status flag Blue camera icon: means that the equipment online no SD card.
eLine Sniper Camera Setup Manual <3> System Tools eLineTechnology.com Click "System Tools" to switch to the system settings interface. A. Update the password: Set or change the camcorder password. 1) (such as setting up the hardware password, all users are required to enter the correct password to view it) II. Restart the camera: Restart the camera. III. Address and baud rate: Set the address and baud rate. IV. Phone image quality: set the phone to see the image quality. V.
eLine Sniper Camera Setup Manual eLineTechnology.com <3.2> Allowed to enter the IP address directly access the camera Allow enter the IP address directly access the camera: 8 The default state is open, you can directly enter the IP address by viewing the camera on the Viewer. Turn off this feature, you can not directly enter the IP address in the Viewer to watch this camera. <4> Network Settings <4.1> Wired cameras If the network camera only in the LAN, without special network settings, "plug and play".
eLine Sniper Camera Setup Manual eLineTechnology.com 9 10 Port test: You can test the application to connect to that the whether the camera be able to the connection is successful. 11 （2）Manually set: according to the actual situation, the user may have the three connected network, using the specified IP address automatically obtain an IP address, PPPoE dial-up Internet access (Click one way links to quickly jump).
eLine Sniper Camera Setup Manual eLineTechnology.com 1. Network type: specify the IP address. 1. IP address：Input an unused IP address in LAN. 2. Mask：The same as the PC in LAN. 3. Gateway：The same as the PC in LAN 4. Preferred DNS：Please use the DNS address provided by ISP, it should be the same as the PC in LAN. 5. Alternate DNS：Option. Used when the preferred DNS is down. 6. After setting, press “Save”. IP cam will connect to internet based on the setting.
eLine Sniper Camera Setup Manual eLineTechnology.com If the user chooses to automatically obtain an IP address. Generally do not need to fill in the other parameters. "Use the following DNS server addresses option should remain the factory does not start settings. After completing the settings, click "OK" to save. Network camera will set the connection on the network Use, you need to enable automatic port mapping.
eLine Sniper Camera Setup Manual eLineTechnology.com The first use of wireless camera, the first camera to plug the Internet cable, find the camera setup camera list, select the view, and do the following settings in the setup.
eLine Sniper Camera Setup Manual eLineTechnology.com Security settings: (1) If the wireless network key security is set to None (Figure 15) (2) If the key wireless network security is set to be consistent with the wireless network (see Figure 16) Note: The key index provided by a router, different routers have their own options.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual eLineTechnology.com <5> Account (Account ID) and password (Password) Registered account can facilitate the management and authorization. An account can manage multiple cameras, may also authorize multi-user viewing. The Register can achieve multiple cameras share a single public IP address. Users through a remote connection cameras, to ensure that the support Internet transport protocol, in order to connect successfully.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual 3. eLineTechnology.com Log in Register page New User Registration Shown in Figure 21, click on the registered account into the account registration page 22 (1) Server: select an appropriate registration server. (Must be consistent and the Previous set the DServer) (2) Device ID: composed of digits and letters, a total of 20 digits. By setting interface copy obtained without having to enter from the keyboard.
eLine Sniper Camera Setup Manual 4. eLineTechnology.com Management Center After successful registration, click "edit account" into the management center. 26 For ease of administration, it is recommended to register multiple cameras to the same user.
eLine Sniper Camera Setup Manual eLineTechnology.com 1． Add equipment: (1) Add the camera. Need to increase the network camera equipment to account under the camera, click Add cameras, the Add camera information interface, enter the new camera name, serial number, choose to upload bandwidth network environment according to the equipment installation, click "Submit" can. Newly added camera will immediately appear on the list. （2）Batch add the camera. Under the camera, click the batch add cameras.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual eLineTechnology.com <6> Video Preview Click on the "video preview" switch to image adjustment interface. When the mouse on the icon will be prompted! CCD series camera interface as the left: 1) Adjustment for video brightness. 2) Adjust contrast. 3) Adjust hue. 4) Adjust saturation. 5) FPS：Video image display for per second. 6) RES：Video image resolution. BPS ： Transmitted bytes. High video quality needs more bandwidth. Click "Save" to save your changes.
eLine Sniper Camera Setup Manual eLineTechnology.com Video Set Camera Model 2C Environment Mode：User can set camera’s environment to get a better image quality. “Auto Mode” is preferred. Banding Filter：User can choose the frequency of the video screen. Sharpness：Adjust video screen sharpness. Brightness：Adjust video screen brightness. Gain：Adjust light compensation. Special：Adjust video screen color. MIC volume：Adjust the volume in camera built-in microphone.
eLine Sniper Camera Setup Manual eLineTechnology.com Advanced Camera Model 2C 1. auto white balance：This option is preferred. 2. config white balance：Adjust balance between Green, Red, and Blue. 3. MIN FPS：Adjust the minimum FPS depends on the light change.
eLine Sniper Camera Setup Manual eLineTechnology.com The camera Model 8 series 1.HZ: you can select the frequency of this corresponds to remove the video water wave phenomena. 2.color hue: You can adjust the chromaticity of the video image. 3. Color Gain: You can adjust the color gain of the video image. 4.White Balance: Set the white balance mode. 5.Noise reduction: Set the video noise level. 6.back-light: Set whether to turn on the backlight compensation. 7.WDR: Set the video wide dynamic. 8.
eLine Sniper Camera Setup Manual eLineTechnology.com Video settings Camera Model F/G 1.HZ: you can select this corresponding frequency to remove the video water wave phenomena. 2.WDR: Set the video wide dynamic. 3.Up and down, left and right: check, video display mirror image upside down or left and right. 4.Sharpness: You can adjust the sharpness of the video image. 5. brightness: can adjust the brightness of the video image. 6. gain: you can always adjust the gain of the light source.
eLine Sniper Camera Setup Manual eLineTechnology.com Scene set Camera Model F/G Select the white balance mode is set accordingly.
eLine Sniper Camera Setup Manual eLineTechnology.com Extended settings Camera Model F/G 1. Adjustment for video brightness. 2. Adjust contrast. 3. Adjust hue. 4. Adjust saturation. 5. : adjust the video noise level. 6. Min FPS: Once selected you can adjust the minimum FPS camera frame rate. 7 color mode: Set camera color mode.
eLine Sniper Camera Setup Manual eLineTechnology.com Lens control The camera Model 6 series 1. Adjustment for video brightness. 2. Adjust contrast. 3. Adjust hue. 4. Adjust saturation. 5. : Adjust Sharpness 6.min volume：Adjust Microphone volume。 7. Microphone：To select inter MIC or outer mic 8. Positive flip: To select stand or up-side-down <8> PTZ Control When the selected camera PTZ function, PTZ control can be hired, otherwise it will grayed out. Click "PTZ Control PTZ control interface.
eLine Sniper Camera Setup Manual eLineTechnology.com PTZ control button Zoom out Zoom in Widen IRIS Lens focus far Narrow IRIS Lens focus in Presentation position Start / stop scan Enable schedule tour Set the cruise plan Prefabricated point of management 定制錄影日期： 所有天錄影： 如果你想 24 小時不 33 停進行監控請選擇 Cruise program settings: set a total of nine cruise paths plus a default path. 此項.
eLine Sniper Camera Setup Manual eLineTechnology.com <9> Video settings <9.1> SD card recording - only for the camera with SD card recording function Click "SD card recording, the user can set the video: behind the camera red REC lamp is a good video to set the reference. The red light indicates the video settings, but did not reach the recording conditions (for example, did not trigger linkage video); flashes that are video; goes out to indicate Stop recording, and there is no other video settings.
eLine Sniper Camera Setup Manual 35 eLineTechnology.com Recording schedules settings: Recording schedules: daily timetable: If you want 24 hours a day to monitor select this option. Points need to customize the recording time per day. Weekly timetable: points following changes to the weekly schedule. Select a date to be monitored. Monthly timetable: points under the changes to monthly plans. Select monitoring since January.
eLine Sniper Camera Setup Manual eLineTechnology.com Motion detection settings (alarm settings): Check e-mail alerts when motion is detected, the program will automatically send an alarm e-mail to the mailbox set. You can add, delete the e-mail recipient, select the trigger event. Enadle email alarm: Check the Enadle email alarm enable e-mail alerts Edit :Click on the "edit’, edit the received message subject.
eLine Sniper Camera Setup Manual eLineTechnology.com 39 40 Motion detection setting (Alarm output settings): DO output enable can be set alarm output, the output level of 24VDC/1A or 110VAC/0.5A of Click Save to save the settings. <9.2> NAS recording Start NAS recording, video files will be saved on a NAS device.
eLine Sniper Camera Setup Manual eLineTechnology.com Config NAS Enabled NAS: select this option will be based on pre-set conditions video. (Enable Success icon is displayed in red, otherwise grayed out) Audio included: selected audio input source video input. Normal recording: no trigger mechanism based on pre-set video. Event recording: the user can pre-set trigger conditions to trigger recording. The trigger condition is a regional one, two, three linkage trigger, and the DI input trigger.
eLine Sniper Camera Setup Manual eLineTechnology.com <10> Video Download Click "Video Download, you can download SD card recording to the local. Video download page click on the "download manager" button, you can download settings and select the downloaded video camera, download time range 1. Download Management Download Manager: SD card recording and is available for download video cameras in the camera list.
eLine Sniper Camera Setup Manual eLineTechnology.com 45 46 <11> Video playback LAN PC or laptop, insert the supplied CD, run Setup, all LAN home as the security network camera will automatically listed in the "Name" list on the lower right corner of the interface. Click on the video playback button, double-click the bottom right corner of the camera name, you can playback video.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual eLineTechnology.com <12> Remote playback Remote video playback is viewed through the web to achieve. To achieve remote viewing and playback, you must register the account and password. Open the web the http:// pc.easyipcam.com input account and password, you can get the remote viewing and playback interface. 49 Account all the camera will be listed in the list on the left.
eLine Sniper Camera Setup Manual eLineTechnology.
eLine Sniper Camera Setup Manual eLineTechnology.com Color Control: Online users can adjust the brightness, contrast, color and saturation. 53 3. The plug-in above the control bar. Can be switched in real time and playback mode 54 4. Plug top right of the control bar Snapshot button Select the network connection Buffer selection box protocol Set snapshot / video storage path Choose to display ones :1-ch-ch-ch or Start / stop recording button 16-ch.
eLine Sniper Camera Setup Manual eLineTechnology.com <13> Troubleshooting Q1: the network cable and the power cord is plugged in, but the LAN can not see images? A1: The network camera does not need to be set, can be viewed in the LAN. Unless the connected switches (Switch) shielded network cameras transmit images. Make sure all the switches are connected, are not shielded UDP transmission mode.
