System information

- 5-
Iris Control
User can adjust the camera’s iris through control keyboard and manual adjust to
get needed image brightness.
Night vision Function(Color/Black-white change)
Camera has built-in night vision function, under auto color/black-white mode
will change CCD illumination according to the change of environment brightness. For
example: in daytime because of enough brightness, using common illumination can
guarantee color image. But in the night it will change into low illumination to show
clear view with black-white mode.
Auto patrol
Put some presets as a group in a certain sequence, it will run this patrol
continuously when speed dome camera is in idle mode.
Mode Scan
Mode scan is through menu to save speed dome tracking route, it will run this
mode scan continuously when speed dome camera is in idle mode.
1.3 Speed Dome Camera Parameter
Electric
Rated Voltage
DC12V/2A
Power Consumption
Max 15W
Decoder Built in
Set
Communication protocol
PELCO-D/P HIK/DAHUA
ID
1-255
Baud rate(RS485)
2400/4800/9600bps/auto identify
Operate
Pan rotate
360 endless Tilt rotate
90 degree, auto flip
Preset
220
Speed
Pan 0.6°-200°/s
Tilt 3.5°-30°/s
Monitor
mode Preset.
patrol,pan scan and
pattern scan
Environment
Operate
environment
Outdoor: -20℃~ 60℃
Indoor: -10℃~50℃
IP Grade
IP66
Physical
Installation mode
Wall/ceiling mount
environment
humidity
0-95% without
condensation
Chapter 1 Product Overview
parameters