User's Manual
To start charging:
1) Connect charging cable to electric vehicle;
2) Connect charging cable to charging staon;
3) Put the RFID idencaon card to the right place. The charging will start aer few seconds.
LED strips indicates status of charging staon:
• Blue – ready / charging nished;
• Red – staon is busy / charging electric vehicle.
Charging cable is locked during the vehicle charging. When the vehicle is fully charged the charging
stops automacally, or it can be stopped by using RFID idencaon card.
The place to use RFID card.
A/B indicaon is lightning in red during the
vehicle charging.
A/B indicaon is lightning in blue when the
charging is nished.
“READY” indicaon lights on when the
charging is nished.
“CHARGING” indicaon is lightning during
the vehicle charging.
LED screen
CityCharge
User manual
Elinta Charge, UAB
Parzanu g. 63M,
Kaunas 50306
Lithuania
Tel.: +370 615 71604
info@elintacharge.com
www.elintacharge.com