Certifications 2

LIFE COLOURS
00336-0003
Elita Modelle Klaus Kutschka
Safety Data Sheet according to Regulation (EC) No 1907/2006
Revision No: 1,01
Revision date: 27.11.2012
Do not smoke - volatile.
Keep away from heat and sources of ignition.
Take precautionary measures against static discharges.
Advice on protection against fire and explosion
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry, cool and well-ventilated place.
Pay attention to anti-explosion rules.
Recommended storage temperature: 5 - 35°C
Requirements for storage rooms and vessels
Incompatible with:
Acids and bases.
Oxidizing agents
Advice on storage compatibility
Keep away from food, drink and animal feeding stuffs.
Further information on storage conditions
7.3. Specific end use(s)
Paint
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits (EH40)
CategoryF/mlmg/m³ml/m³Chemical nameCAS No Origin
TWA (8 h)50(2-methoxymethylethoxy) propanol34590-94-8 308 WEL
STEL (15 min)- - WEL
TWA (8 h)504-Hydroxy-4-methyl-pentan-2-one123-42-2 241 WEL
STEL (15 min)75 362 WEL
TWA (8 h)25Cumene98-82-8 125 WEL
STEL (15 min)50 250 WEL
TWA (8 h)25Trimethylbenzenes108-67-8 125 WEL
STEL (15 min)- - WEL
TWA (8 h)25Trimethylbenzenes95-63-6 125 WEL
STEL (15 min)- - WEL
8.2. Exposure controls
Ensure adequate ventilation, especially in confined areas.
Occupational exposure controls
Do not inhale vapours.
Wash hands before breaks and immediately after handling the product .
When using, do not eat, drink or smoke.
Take off immediately all contaminated clothing.
Avoid contact with skin, eyes and clothing.
Protective and hygiene measures
In case of insufficient ventilation wear suitable respiratory equipment (gas filter type A).
Respiratory protection
Protective gloves resistant to chemicals made off butyl, minimum coat thickness 0,7 mm, permeation resistance (wear
duration) approx. 480 minutes, i.e. protective glove <Butoject 898> made by www.kcl.de.
This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374 carried out
under lab conditions.
Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations
given by the manufacturer of protective gloves.
Hand protection
Tightly fitting goggles.
Eye protection
GB - EN
Print date: 27.11.2012
Page 4 of 8