Spec Sheet

C048V1
OUTDOOR LANDSCAPE LIGHTING
FLOOD LIGHT
PRODUCT DESCRIPTION
LABELS:N/A
Die Casting brass floodlight includes spike and 3' of wire.
Material: Die Casting Brass
Lead wire: 3’ SPT-1W 18A
Glass or Lens:Frosted Glass
light source(not included): MR16/G4 Bulb Halogen
Maximum Lamp Rating: 35W
SPECIFICATIONS:
FINISHES: Antique Brass
INSTALLATION：
Hammer the spike into ground. Clear away area in ground at wire
way slot in top of spike. Lay 12V cable into wire way slot and screw
luminaire into spike. Loose the Hood screw and Pull the Hood out.
Install the G4 or MR16 bulb into the socket. And then install the
hood back to the body. Loose the knob to get desired angle, then
tighten the knob.
DIMENSIONS: W2.75" D5.25" H:8"