User's Guide

RJ50: Connects
to the Screen
3.5mm Projector
Trigger Port
3
Led Indicator light
Up
Stop
Down
IR Receiving Window
Programming
Key
Logo
FBZZ-RC1Z003-01
ZRC1-WB Wall-box controller
Programming Key Instructions:
1. How to Preset the Screen’s Drop Position: Drop the screen to the desired position you want to set it at.
Press & hold the “Programming Key”, then press the “down key”.
2. Clear/Reset the Screen’s Drop Position: Press & Hold the “Programming Key”, then press the “stop key”.
3. How to Synchronize/pair a new RF remote: Press & Hold the “Programming Key”, then press the “Up key” on the wall-box (wall-box
LED flashes).
Then press the “Up key” on the RF remote.
The wall-box LED will flash 5 times, to indicate the RF remote has been properly synchronized/paired.