Elite ezFrame Series Fixed Frame Projection Screen User’s Guide Rev. 010410-JA www.elitescreens.com info@elitescreens.
Parts List 1. 2. 3. 4. 5. Frame Parts Tension Rods Screen Material Center joints Elbow Joints x 6 pcs (4 top/bottom frame pcs. + 2 side frame pcs) x 6 pcs (4 top/bottom rods + 2 side rods) x 1 pc x 2 pcs x 4 pcs 6. 7. 8. 9. 10. 11. 12.
Please do not tighten the screws completely, to make sure the frame piece lines up correctly. 3. Insert both elbow joint connectors into the long horizontal frame (see fig.1) Long frame Push Push Joint ( fig.1) 4.
. Join all four frame parts together following the steps showed below. (fig.2) Insert the exposed ends of the joint connectors into the short (vertical) frame and align the four corners so that they meet at perfect right angles Push Push ( fig.2) After making sure that all four corners join at right angles to form a perfect rectangle, fasten the four angles together by using the (x8) joint screws included. (see fig.3) 5. Screw ( fig.
Attaching the screen material to the frame 1. Lay out the screen and tension rods on a clean and dry surface. Insert the screen tension rods through the sleeves according to their corresponding lengths on each edge of the screen as seen below. (see fig.4) Tension Rod (Horizontal) x 4 Tension Rod (Vertical) x 2 Screen Push Tension Rod (horizontal) Steel Rodrod Rodrod Steel Push Tension Rod (Vertical) Push ( fig.4) 2.
Black backing for AcousticPro1080 models This procedure only applies to AcousticPro1080 models, disregard if your ezFrame is not an AcousticPro1080 variant. The black backing counters the effects of light penetration that would otherwise light up all items behind the screen and spoil the picture. The black backing goes behind the projection surface and are held into position by Velcro-faced fix plates. Fix plate secures AcousticPro1080 material and Black backing the black backing behind it.
Attaching the Fix Plates___ 1. Make sure that the material and frame are both lying face down on a clean, dry and non-abrasive surface. 2. Center the material inside the frame. Please note the material will be noticeably smaller because stretching the material is required to create a sufficient amount of tension for perfect material flatness. 3. Start attaching the fix plates in the center of the long horizontal edge and (1) then alternate with the center short sides (2) as shown in diagram (fig.7).
3. Slide the top end of the bar into the top center point location to complete center support bar installation. This will provide added stability to your frame and added tension to the material. Center Support Bar (Fig. 8) Installation 1. Locate your desired installation location with a stud finder (recommended) and mark the drill-hole area of where the screen is to be installed. 2. Drill a hole with the proper bit size according to the wood screws included. 3.
CAUTION Please follow these instructions carefully to ensure proper maintenance and safety with your ezFrame Screen 1. When hanging the screen up, please make sure that no other objects such as power switches, outlets, furniture, ladders, windows, etc. occupy the space designated for your Fixed-Frame screen. 2.
Warranty Policy Two (2) year warranty on parts and labor from defects in workmanship from purchase date as follows (except for refurbished units as specified below): Refurbished units carry a 90-day parts and labor warranty. Each party will be responsible for one way shipping during the warranty period T T DOA (Defective on Arrival): Must be reported within 7 business days of receipt. An RMA (Return Merchandise T Authorization) number must be issued in order to process a replacement.
Register your warranty at www.elitescreens.com/register.html US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 Service Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958 Asia or China Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
