Un niversaal Ceilinng Projjector Mount M A56 6-E25 5B w.elitescreenss.com www info@eliteescreens.
The A56‐E25B Projector mount is 90% compatible with most projector designs. It is easy to use for ceiling projector installations. It includes standard screw hardware for the projector. It can be adjusted in both length and height to optimize the right level of projection. The extension bar can also be removed for low ceiling installation, please see example #1. Example of A56‐E25B with extension bar for high or angled ceilings. www.elitescreens.
#1 Flush Mount assembly M5 x 12 Hex screws M5 x 12 Hex screws M5 Washer M5 x 12 Hex screws M5 x 12 Hex screws By removing the upper and lower extension you can flush the projector to the ceiling. This installation is designed to bring the projector closer to the ceiling to accommodate room size. The extension does not necessarily have to be removed for the projector to be mounted. The design of this particular mount has the ability to be extended or flushed closer to the ceiling.
Mount assembly with extension bar #2 M6 Anchors (4 nos.) Projector outlet a M5 Washer b M5 x 12 Hex screws Ceiling plate Adjustable drop height up to 23” ¾ Upper extension Extension can be removed for low ceiling. Optional extensions can be purchased at your local hardware store. M6 Threaded rod Lower extension a M5 Washer M5 x 12 Hex screws M6 x 16 CSK Phillips (4 n o s.) b M5 x 12 Hex screws M6 Long nut (4 nos.