Universal Ceiling Projector Mount A56-E25B2 User Guide Rev.030111‐AS www.elitescreens.com info@elitescreens.
The A56‐E25B2 Projector mount is 90% compatible with most projector footprint designs. It is easy to use for low/high ceilings and short‐throw wall projector installations. It can be adjusted in both length and height to optimize the right level of projection. SPECIFICATIONS Max weight for ceiling and wall installation. Total weight of the A56‐E25B2. Overall dimensions of the A56‐E25B2. (L x W x H) Example of the A56‐E25B2 with extension bar for high or angled ceilings. 37.4 lbs. 3 lbs. 12.5” x 4.3” x 2.
#1 Flush Ceiling Mount M5 x 12 Hex screws M5 x 12 Hex screws M5 Washer M5 x 12 Hex screws M5 x 12 Hex screws This installation is designed to bring the projector closer to the ceiling to accommodate room size. The extension does not necessarily have to be removed for the projector to be mounted. The design of this particular mount has the ability to be extended or flushed closer to the ceiling. The extra accessories can be removed and replaced with additional parts.
#2 Mount assembly with extension bar M6 Anchors (4 nos.) Projector outlet a M5 Washer b M5 x 12 Hex screws Ceiling plate Adjustable drop height up to 23” ¾ Upper extension Extension can be removed for low ceiling. Optional extensions can be purchased at your local hardware store. M6 Threaded rod a Lower extension M5 Washer M5 x 12 Hex screws M6 x 16 CSK Phillips (4 n o s.) b M5 x 12 Hex screws M6 Long nut (4 nos.
Short-throw mount assembly #3 Remove the 2.5” Phillips head screw from the Pan/ Tilt Swivel to easily modify your mount to be used as a short‐throw Mount. Next is to remove the Straight Blade head screws (2) from the Pan /Tilt Swivel. Connect the Spider Body to the Pan Tilt Swivel (as shown in picture), and secure with one M4x8 Phillips screw and the M5x55 screw and M5 Nut. Connect the Extension Bar to the Pan/Tilt Swivel and secure on both sides with the M4x8 Phillips screws.
Warranty Policy • Two (2) year parts and labor warranty from defects in workmanship from purchase date as follows (except for refurbished units as specified below): • Three (3) year parts and labor warranty from defects in workmanship for GEMR (Government, Educational, Military, & Religious) purchases of new product only. • Refurbished units carry a 90‐day parts and labor warranty. Each party will be responsible for one way shipping during the warranty period.
Contact Info US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877‐511‐1211 #3 Service or fax +1 562‐926‐8433 Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49‐(0) 40‐30392958 Asia Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86‐(0) 755‐8461‐7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
