User Manual

V072415-EA www.elitescreens.com 9
Notice to Installer:
These instructions only apply if you have the CineGrey 3D ALR material. Please use the following installation
instructions to obtain superior optical performance from the Angular Reflective ALR (Ambient Light Rejecting)
Screen.
Projector Ceiling Installation: Make sure the
projector (light in) is angled (ϴ1) to reflect (ϴ2) at
the mirror-opposite angle (light out) to align with
the viewer’s eye level.
Projector Table Top: Make sure the projector
(light in) is angled (ϴ1) to reflect (ϴ2) at the
mirror-opposite angle (light out) to align with the
viewer’s eye level.
Minimum Lens Throw Distance = 1.5x image width
Images are not up to scale and are for illustrations purposes only.
Note: Improper installation will result in light loss and produce a dark image. This is due to the projector’s light
reflecting in the wrong direction.
Align the M6
screws with the
two holes on the
Corner Support
Bars.
Figure 2