User Guide

Updated 8/11/2014 EA www.elitescreens.com 1

Do-it-Yourself Outdoor Projection Screen

DIY/DIY Pro Screen Series

User’s Guide

Thank you for choosing the DIY Screen Series portable projection screen! Please read through this user

guide before utilizing the screen. Correct usage and maintenance will ensure a long product life

Please make sure all parts listed below are included before proceeding with the installation.

What’s included?

a. DIY Outdoor Screen Material x 1

b. Dynamic Rope x 4

c. Polypropylene Rope x1

Setup Procedure

PLEASE NOTE: Prolonged storage of the DIY Screen Series in its factory packaging may result in

having noticeable horizontal lines on its surface. The lines are identified as “Memory Lines”. The

Memory Lines can be eliminated by leaving the screen in the down position for a few days after the

installation. This allows the material to stretch out. After the few days of leaving the screen

installed, the Memory Lines should vanish without return.

There are many unique ways for the DIY/DIY PRO to be installed. Below is a general guideline for the

installation of the screen. Please note that a frame is not included with the DIY/DIY PRO screen.

1. Unroll the screen material on a clean surface.

2. Insert the Polypropylene rope through each grommet in the material and attach to the

installation location.

PAGE 1
Do-it-Yourself Outdoor Projection Screen DIY/DIY Pro Screen Series User’s Guide Thank you for choosing the DIY Screen Series portable projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life Please make sure all parts listed below are included before proceeding with the installation. What’s included? a. DIY Outdoor Screen Material x 1 b. Dynamic Rope x 4 c.
PAGE 2
(Image below is of DIY Pro Series- Actual screen appearance will vary based on series and model number) Tightly fasten the Polypropylene rope throughout each grommet to make the screen flat while fastening the rope to the installation location. Do several tests to ensure the rope stretches the material to its maximum extent. Once the approximate length of rope that is needed can be determined, remove any excess rope by simply cutting it. Note: Wrap rope with tape before cutting 3.
PAGE 3
Limited Warranty Policy What is Covered: Elite Screens, Inc. (“Elite Screens”) warrants its products to the first retail purchaser, if purchased new and operated in the United States or Canada, to be free from defects in workmanship and materials (except as provided below) for a period of (2) years from the date of original purchase, and (3) years for products purchased directly by educational, non-profit, religious or government organizations.