Electric Motorized Projection Screen Spectrum Series User’s Guide 1 Rev.010312-AS www.elitescreens.com info@elitescreens.
Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedure below. Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
Installation Warning Due to various installation environments, the instructions provided in this user’s guide are for reference only. Please consult a professional installation company for further installation and safety advice. The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty installations. The Screen’s Top Black Drop is already set to its maximum drop distance.
Accessories for Spectrum Series Please make sure all accessories below are included before proceeding. Red+ A. Infrared Remote D. AAA Batteries B. 3 Way Wall Switch E. Bubble Level Green- C. 12 Volt Trigger F. Radio Frequency Remote (Not Included) G. Infrared Eye Receiver (Not Included) 4 Rev.010312-AS www.elitescreens.com info@elitescreens.
Control System for Spectrum Series 1. 5-12V Trigger: The built-in 5-12V trigger input allows your screen to synchronize its drop & rise with the projector’s power cycle. The screen deploys when the projector powers up and will retract when the projector powers down. The 5-12 volt adaptor connects to your projector’s trigger 3-prong power cable output via a separate cable that may or may not be provided by the manufacturer of the projector.
Installation Instructions Please consult a professional installer. Elite Screens is not liable for any faulty installations. 1. 2. 3. 4. 5. 6. 7. Select the installation location for your screen. Ensure that it is within reasonable proximity from your power source. For best support of your screen, it is ideal to secure your screen into the studs of your house’s internal framework. If studs are not available, use hollow anchors for mounting your wall screws into drywall.
Troubleshooting & FAQ’S For additional information, please contact Elite Screens at techsupport@elitescreens.com 1. If your screen does not move, please check the power supply. The screen will understandably not move without power. 2. Make sure the power cord is firmly plugged to the power outlet. 3. Make sure that all cable connections are secure. 4. If the screen works well with the line switch but not with the remote control, please make sure the remote controls have fresh batteries.
Spectrum Series Dimension Table *Measurement dimensions are intended as a reference only and subject to change without notice. Note: Data Error may be ±1" 8 Rev.010312-AS www.elitescreens.com info@elitescreens.
Limited Warranty Policy What is Covered: Elite Screens, Inc. (“Elite Screens”) warrants its products to the first retail purchaser, if purchased new and operated in the United States or Canada, to be free from defects in workmanship and materials (except as provided below) for a period of (2) years from the date of original purchase, and (3) years for products purchased directly by educational, non-profit, religious or government organizations.
