Owner Manual

110315-JA www.elitescreens.com 10
Notice to Installer:
The StarBright CLR ™ is exclusively for table-mounted ultra-short throw projectors as illustrated in the Example 2
diagram. Overhead placement or a standard projector will make the image very dark, on account of the screen’s absorbent
layer deflecting light that is not aligned with its reflective angle.
Please use the following installation instructions to obtain superior optical performance from the Retro-Reflective ALR
(Ambient Light Rejecting) Screen.
Example 1: Improper projector/type installation
Example 2: Proper projector installation
Images are not up to scale and are for illustrations purposes only.
Part of the projector’s light is absorbed
which will cause the image to be dark.
1. Only ultra-short-throw projectors will properly reflect
projected light to the viewer’s eyes
2. Standard-throw projector will display picture artifacts
such as moiré, oblique lines and a reduced reflected light.
1. Tabletop mounted ultra-short-throw projector
2. Lens throw ratio < 0.3 x image width
Projector light properly reflected back to viewer’s eyes