Owner Manual

Table Of Contents

110315-JA www.elitescreens.com 5

4. Carefully and gently place the assembled frame on top of the screen material as shown below. Make sure to not

allow the angle edge of the frame to come in direct contact with the material to avoid puncturing or damaging it.

5. After all of the corners of the frame have been properly aligned (example D), attach the material on the frame in the

following order A→B→C→D (see instructions below for details).

Attach the screen material to the corners as shown below.

Screen material back facing up

2) Fold over and attach

material to the Velcro

strip of the frame.

3) Fold over second side

and attach to frame

1) Stretch the screen material in

the direction

of the arrowhead.

Velcro

4) Repeat until all four sides are

done in the order A, B, C, D