Ez-Electric Screen Elite Home series Ver.1.5 Users Guide www.elitescreens.com / eliteinfo@elitescreens.
Accessory for Home series ①IR Red +12V ②RF ③Wall box Green 0V ④12V trigger ⑤ Eye receiver ⑥Battery Please always point to the eye receiver when using the IR remote ⑦ Bubble level www.elitescreens.com / eliteinfo@elitescreens.
Important Safety and Warning Precautions 1. Be sure to read this manual before use and follow the procedures specified: ☆ Please retain this manual for future reference. ☆ To avoid any damage, do not use any accessories not recommended by the manufacturer. ☆ Handle the device carefully during transportation to avoid impact. ☆ ☆ Do not put the device on uneven or inclined surfaces. ☆ Do not put heavy objects on the power cord; affix the power cord properly to avoid someone tripping over it.
Warning Individual modifications to this product are prohibited and will void the user’s warranty. Please contact the Service Department for any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Connection pins inside of case 1. 12V Trigger: 12V trigger for your new Elite Home2 -----allows your screen to synchronize its drop and rise with the projectors power cycle. The screen drops when the projector powers up and retracts when the projector powers down. To Projector Video Projection Interface Red DC12V Green 0V 2.
Please read this guide prior to installation. ●Make sure the current rating is equal to that of the appliance rating when an extension cord is used. ●Do not use any accessories not provided by the manufacturer with this screen. We will not be responsible for any risks of fire, electric shock, or injuries resulting from the misuse of this product with accessories not designed for it. ●Make sure the screen is mounted in a horizontal level.
The IR receiver will be connected from the screen The 3 prong cable will be connected from the outlet to the case. 11.65 mm. in width Although the IR remote requires a direct line of sight with the IR sensor to function, case can be hidden from sight and operated using the RF remote. When depressing the directional buttons you should hear a faint click signifying that the mechanism is working properly. RF IR 8 0mm in w id th UP Stop Down This is the IR (Infra-Red) remote with a range of 15 Ft.
1. Q: Why does my screen no longer function? A: There are a few possible things you could check: A.) Make sure your wall plug has power and that the screen is properly plugged in. B.) Please check the fuse to y our screen. (Call Tech support for location of fuse) C.) If screen works well with the line switch but not with the remote control, make sure the remote control has good batteries in it. D.) Our electric screens with a tubular motor installed are equipped with a Thermal relay.
Two (2) year warranty parts and labor from purchase date as follows (except for refurbished units as specified below): Refurbished units carry a 90-day parts and labor warranty. Demo units or open box items are AS IS items and do not carry a warranty. Each party will be responsible for one way shipping during the warranty period. DOA (Defective On Arrival): Must be reported within 7 business days of receipt. An RMA (Return Merchandise Authorization) number must be issued in order to process a replacement.
Two ways to register your warranty with Elite Screens Inc. A. On Line (F aster and Easier) www.elitescreens.com/register.htm B. Fill out & Fax to (562)483-8498, Attn: Customer Service Dept.
www.elitescreens.com / eliteinfo@elitescreens.
