Quick Start Guide

ManualsBrandsElite Screens ManualsProjector ScreensElite Screens - SableFrame 100" Projector Screen - Velvet black

Notice to Installer:

Please use the following installation instructions to obtain superior optical performance from the

CineGrey 5D™/CineGrey 3D®/StarBright 4 Angular Reflective ALR (Ambient Light Rejecting) Screen.

•Angular-Reflective material is not compatible with ultra/short-throw projectors

•Minimum lens throw ratio 1.5x image width

•Ambient light must not come from the same direction as the projector

Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is

important to position the projector so that the viewer will get the best possible image.

Step 1: Establish the general “eye level” of the viewers

Step 2: Set the appropriate projection level

Step 3: Adjust the screen height level and projection angle

Input Angle (A) = Output Angle (B) aligns with the viewer’s angle

Projector Ceiling Installation: Make sure the

projector (light in) is angled (A) to reflect (B) at the mirror-

opposite angle (light out) to align with the viewer’s eye level.

Projector Table Top: Make sure the projector (light in) is angled

(A) to reflect (B) at the mirror-opposite angle (light out) to align

with the viewer’s eye level.

Ceiling Mounted Short-throw Projector

Note: Improper installation will result in light loss and produce a dark image. This is due to the projector’s light reflecting in the wrong direction.

Images are not up to scale and are for illustration purposes only.

Tabletop Ultra-short Throw Projector

www.Elitescreens.com

Incorrect Installation Examples

Correct Installation Examples