User`s guide

Rev.013114-JA 8 www.elitescreens.com

3. The M8 expanding bolts (G) mount into thick wood beams, stone or concrete and will support the

screen. Use the Socket wrench (D) to attach the M8x40mm hexagonal screws. The expanding bolts

should be firmly tightened and tested to make sure that they will hold the weight of the screen.

4. Insert the threaded rods (C) through the M8 expanding bolts and then attach the M8x40mm

hexagonal screws with the washer (E). Last put the Hanging Bracket (B) through the threaded rod equal

to the height of the screen’s housing. Once they are firmly in place (as shown below) make sure that

they will hold the weight of the screen.

5. Push the screen up into the space. Use the threaded rods (C) to attach the screen assembly to the

ceiling. The hexagonal screws (E) will connect the screen to the rest of the assembly. Once firmly in

place, use the nuts (F) to ensure a firm connection. Use the socket wrench (D) to make sure that the

bolts are firmly tightened.

Ceiling

Socket wrench (H)

Ceiling

E and F

Push

Push the screen

to the hole of the

ceiling，the

screw across the

hole of the end

cap.

Use the Socket wrench

to attach the washer

and the outside hex

screws, and then

adjust the bottom of

the screen to make it

parallel with the

ceiling, and then

fasten the screw.