User Guide

Rev101912-JA www.elitescreens.com 4
Installing the support rod:
First, make sure that the hanging hook is pointing toward the front facing the same direction as the
screen, then insert the square end of the telescopic support rod into the support plate as shown below.
Pull up the screen:
Hold the pull hook with one hand, pull the screen up gently and hang it on the bracket hook.
Vertical Adjustment:
First loosen the locking sleeve, and then hold the small support rod with the left hand so as to slowly raise
it upwards until the screen is fully stretched to the desired position.
Support
Plate
When attaching/detaching the screen to the
pull hook, please be sure to raise the
screen using the handle indicated here as
pulling on other parts of the top support
bar may cause damage to the screen. Make
sure to firmly hold the handle to avoid the
screens from suddenly retracting into the
housing.