User Guide

ManualsBrandsElite Screens ManualsElectronicsElite Screens Kestrel Series, 84-inch 4:3, Portable Electric Motorized Floor-Rising Projection Projector Screen, FE84V

11/29/2016 www.elitescreens.com 1

Kestrel Series

(Version 2)

Electric Floor Rising

Projection

Screen

USER’S GUIDE

IMPORTANT SAFETY NOTES

1. Please read th is manua l bef ore use an d f oll o w the p ro ce du re s spe c if ied :

a. Please retain this manual for future reference.

b. To avoid any damages to the screen, do not use any accessories or parts not recommended

by Elite Screens.

c. Handle the device carefully during transportation.

d. Do not set up screen on uneven surfaces.

e. To prevent electrical shock or fire; never over load the power cord, and avoid contacting the

motorized components with liquids or foreign objects.

2. The tubular motor equipped in the electric screen feature an overheat protection sensor.

If the screen is consecutively brought up and down between 3-4 minutes, the motor will

automatically shut-off to prevent the motor from sustaining damage through overheating. If

the automatic shutoff is activated, please allow 30 minutes cool down before resuming

operation.

3. The Kestrel Series Screen is equipped with a strong tension cross-spring system. Please do not

attempt any unnecessary repairs. It is at your own risk to open the inside cover or

dismantle/work on the screen. Individual modifications to this product are prohibited and will

void the user’s warranty.

4. When using the screen, please

a. Avoid strong wind, rain, or electrical storms.

b. No direct sunshine (UV Radiation)or moisture.

c. Keep away from fire sources and high temperature devices.

d. Turn off the power before moving this product.

eep away from

dren

Keep

hands clear

rom the

closing panels

Summary of content (4 pages)

PAGE 1
Kestrel Series (Version 2) Electric Floor Rising Projection Screen USER’S GUIDE IMPORTANT SAFETY NOTES 1. Please read th is manua l bef ore use and f ol l ow the p ro cedu res spe c if ied : a. Please retain this manual for future reference. b. To avoid any damages to the screen, do not use any accessories or parts not recommended by Elite Screens. c. Handle the device carefully during transportation. d. Do not set up screen on uneven surfaces. e.
PAGE 2
NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Guidelines. • The products are designed to provide reasonable protection against harmful interference in a residential/commercial installation and end user application and may radiate radio frequency energy. • However, there is no guarantee that interference will not occur in a particular installation.
PAGE 3
Setup: Remove the IR Receiver from the housing on the left side of the Kestrel Floor Electric Screen as shown in the pictures below. About the Control System: 1. Manual Operation Switch: The left side of the screen's housing includes a UP/STOP/DOWN switch to raise, lower and stop the screen without the use of the RF/IR remote. See image below for reference. Please note, the screen power supply switch must be ON for use of this Manual Switch. Up / Stop / Down 2.
PAGE 4
About the RF/IR Remote Controls: The new remotes, included in this version of the Kestrel Series, are touch sensitive remote controls. Please be sure to place your finger directly in the center of the button when attempting to control your screen. You will see a blue light flash above the buttons when used properly.