User manual

7
Rev.052611‐AS
www.elitescreens.com
 [e-mail]
ATTACHTHEFIXPLATES




1.Makesurethatthematerialandframearelyingfacedownonaclean,dryandnon‐abrasivesurface.
2.Centerthematerialinsidetheframe.
Note:Thematerialwillbenoticeablysmallerbecausestretchingthematerialisrequiredtocreatea
sufficientamountoftensionforperfectmaterial
flatness.
3.StartattachingtheFixPlatesinthecenteroftheHorizontalCurvedFrame’sedgeand(1)then
alternatewiththecentershortsides(2).

Note:Followtheseinstructionstomakesurethematerialisproperlyfixedinthecenterpositionofthe
frame.AfterattachingtheFixPlates
insequence#2(thecenteroftheshortsides),pleaseremovethe
fixplatesinsequence#1(thecen terofthelonghorizontaledge)andreattachthemagain,and
alsoremovethefixplatesonsequence#(2)andreattachthemagain.

4.Thencontinuetofollowourrecommendedordernumbers
3‐8toproperlydistributetensionto
thescreenmaterial.

