Electric Motorized Projection Screen Home 2 Series User’s Guide 1 Rev.010412-AS www.elitescreens.com info@elitescreens.
Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedure below. Caution: The Screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
Installation Warning Due to various installation environments, the instructions provided in this user’s guide are for reference only. Please consult a professional installation company for further installation and safety advice. The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is not liable for any faulty installations.
Accessories for Home 2 Series Please make sure all accessories listed below are included before proceeding. A. IR Remote Red+ B. RF Remote C. 3 Way Wall Switch D. IR Eye Receiver Green- E. 12V Trigger F. AAA Batteries G. Bubble Level 4 Rev.010412-AS www.elitescreens.com info@elitescreens.
Hardware Parts List for Home 2 Series Please make sure all items listed below are included before proceeding with the installation. A C B D 120” & above x 3 brackets Hardware Parts List A. Screw & Dry Wall Anchor B. Bolt C. Masonry Screw & Anchor D. Extruded Hanging Bracket QTY 2EA. 2 2EA. 2 or 3 Installation Instructions Please consult a professional installer. Elite Screens is not liable for any faulty installations. 1.
2. Slide the Extruded Hanging Bracket (D) through the rail located below the slide channel until it meets with the top of the Bolt (B) and slightly secure the lug-nuts located on the top & bottom of the bolt to attach the bracket. 3. Mark the installation location to drill your hole. Insert the proper screw and secure the bolts to the bracket. Top hole for ceiling installation Back hole for wall installation 4. Example of the Home 2 installed to a wall, ceiling and enclosed.
Troubleshooting & FAQ’S For additional information, please contact Elite Screens at techsupport@elitescreens.com 1. If your screen does not move, please check the power supply. The screen will understandably not move without power. 2. Make sure the power cord is firmly plugged to the power outlet. 3. Make sure that all cable connections are secure. 4. If the screen works well with the line switch but not with the remote control, please make sure the remote controls have fresh batteries.
Home 2 Dimension Table *Measurement dimensions are intended as a reference only and subject to change without notice. Note: Data Error may be ±1" 8 Rev.010412-AS www.elitescreens.com info@elitescreens.
Warranty Policy • • • • • • • • Two (2) Year parts and labor warranty from defects in workmanship from purchase date as follows (except for refurbished units as specified below). Three (3) Year parts and labor warranty from defects in workmanship for GEMR (Government, Educational, Military, & Religious) purchases of new product only. Refurbished Units carry a 90-DAY parts and labor warranty. Each party will be responsible for one way shipping during the warranty period.
Contact Information US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 or fax +1-562-926-8433 Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958 Asia Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
