User Guide

ManualsBrandsElite Screens ManualsProjectorsIWB4.2X20W2

Insta-DE 2 Series

Dry-Erase Front Projection Screen Film

User’s Guide

Thank you for choosing the Insta-DE2 Series dry-erase whiteboard projection screen! Please read through

this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Precautionary Notes:

Before using the dry-erase function of your whiteboard screen, please make note of the following instructions

to properly maintain and clean your dry-erase surface projection screen. (These Whiteboard cleaning tips are

just as relevant with any dry-erase writing surface as they are with our Whiteboard-Projection Screens.)

1. Only use a high density foam eraser when removing dry-erase markings from the Whiteboard screen.

2. Do not use abrasive erasers as these may scratch the surface of the screen.

3. Never spray the whiteboard cleaner solution onto the surface while marker writing is present and then

attempt to use a high density foam eraser to remove. This will only smear the dry-erase marker ink making

the surface more difficult to clean and will likely ruin the foam eraser.

4. If there are any dry-erase markings left behind even after attempting to remove them using our high

density erasers, spray our whiteboard cleaning solution directly onto the screen surface and use only a soft

microfiber cloth to wipe-down and clean the area.

For a video demonstration, please visit: http://www.elitescreens.com/whiteboardscreen-cleaning

If replacement cleaning accessories are needed, please visit the Whiteboard cleaning accessories section of

our website at http://www.elitescreens.com/clean-whiteboard

Product Features

 Award winning and GREENGUARD certified VersaWhite material.

 1.1 gain with 180-degree wide viewing angle.

 Special anti-scratch layer to ensure long use as a dry- erase/projection

screen.

Application Advantages

 Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.

 Includes adhesive black velveteen border to enhance contrast and overall appearance.

 Perfect dry-erase and projection solution for today's short throw projectors.

 Ideal and effective instructional presentation tool in the classroom, boardroom, and training facilities.

Summary of content (6 pages)

PAGE 1
Insta-DE 2 Series Dry-Erase Front Projection Screen Film User’s Guide Thank you for choosing the Insta-DE2 Series dry-erase whiteboard projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life. Precautionary Notes: Before using the dry-erase function of your whiteboard screen, please make note of the following instructions to properly maintain and clean your dry-erase surface projection screen.
PAGE 2
Product specifications Specifications: Color display Thickness Material composition White 2.1mm High molecular weight copolymer of Terephthalic acid ethyl esters 1m2/377g At room temperature 1.1 180∘ Weight Temperature Gain Viewing Angle What’s in the package Please make sure all parts listed below are included. Notes: For best results and maximum product longevity, ONLY use a high density whiteboard Eraser. a. b. g. Model Number IWB86VW2 IWB97XW2 IWB105HW2 IWB4.2x10W2 IWB4.2x20W2 IWB4.
PAGE 3
P reparing the i nst all ati on surface: The Insta-DE 2 product is to be solely installed on flat surfaces. Prepare the flat wall/surface by cleaning the entire area. Do not install if any imperfections are found on the surface such as drilled holes, glue/tape residue, dents, etc. We recommend sanding the area first to make sure you have a clean flat and smooth surface. Failure to remove such imperfections can damage the product.
PAGE 4
9. Sand the surface until no adhesive residue remains. 10. Apply one coat of Professional R-35 Primer (do not allow it to dry) and immediately apply the Insta-DE2 to the wall. 11. Unroll the Insta-DE2 on to the wall lining it up with the drawn line from Step 3. Note 1: Each side of the material is labeled FRONT/BACK Note 2: Do not allow the material to wrinkle or crease to avoid permanent damage. 12.
PAGE 5
Adhesive black velvet border installation 1. Measure the top/bottom and left/right sides of the Insta-DE2 screen to obtain the required length of the velvet border you will need to use for bordering your screen. 2. Peel a small portion off of the velvet border and place it about half an inch over the white area of the screen. Continue to peel off and roll out the remainder of the velvet border until you have reached the end and cut the edge.
PAGE 6
Below are sample pictures of improper installations. The above pictures are the result of improper installations. The surface to which you are installing this material to should be perfectly smooth. If in case the surface is uneven, it is recommended to place a smooth board over the desired space of the install first. This will eliminate any bubbling of the material over time. For more information, technical support or your local Elite Screens contact, please visit www.elitescreens.