Safety Information

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Section 4: Execution
4.1 Pre-Installation

Carefully unpack the screen.

Always handle the screen in a leveled position on a clean surface.
4.2 Installation
Flush Wall Mounting
1.
Mark the location of where the screen is to be installed for the pre
2. After marking the area an
d drilling the hole, insert the proper screw into the drilled hole and
leave
about 1/8” of an inch from the wall to mount the screen.
3.
Mount your screen from the keyhole located on back of screen’s left and right end cap.
Note: Do not remove the end caps
Removing the end caps will release the tension of the internal spring mechanism.
Ceiling Mounting
(additional hardware required)
Optional
installation using a chain to hang the screen from the ceiling.
1. You can also hang the screen on a ceiling by using a chain (not included) and hang it by the two
d-
rings loops located on each end of the case.
Keyhole located on
back of end cap
Front view
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens
China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Carefully unpack the screen.
Always handle the screen in a leveled position on a clean surface.
Mark the location of where the screen is to be installed for the pre
-
drilled hole.
d drilling the hole, insert the proper screw into the drilled hole and
about 1/8” of an inch from the wall to mount the screen.
Mount your screen from the keyhole located on back of screen’s left and right end cap.
Note: Do not remove the end caps
to mount the screen to the wall.
Removing the end caps will release the tension of the internal spring mechanism.
(additional hardware required)
installation using a chain to hang the screen from the ceiling.
1. You can also hang the screen on a ceiling by using a chain (not included) and hang it by the two
rings loops located on each end of the case.
Side view
Front view
China Ltd.
drilled hole.
d drilling the hole, insert the proper screw into the drilled hole and
Mount your screen from the keyhole located on back of screen’s left and right end cap.
Removing the end caps will release the tension of the internal spring mechanism.
1. You can also hang the screen on a ceiling by using a chain (not included) and hang it by the two
Side view