Safety Information

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
4.3 Screen Operation
Note: Always
pull the screen down or let it up in a 90
screen to touch the screen case when the screen goes up or comes down to avoid damaging the
screen material.
1. Pull the screen down from the lanyard or from
the handle only in a 90-
degree angle. Do not attempt
to pull the screen down by the surface or touch the
screen, as it will damage the screen and void the
warranty.
Note: An internal auto-
lock mechanism system will
cause the screen to stop and lock on the p
2. If you want to the screen to retract back, simply pull the
screen down more than 2 inches and retract the screen back by
quickly and smoothly releasing it up gently.
equipped with a
SLOW RETRACT MECHANISM
which allows the screen to slowly retract without the need to hold
on to the handle or lanyard. Simply release the handle and the
screen will retract by itself.
Note: Always release at a 90-
degree angle and do not let go
until the screen is entirely ins
ide the case
If ever the screen feels stuck, keep in mind that the screen’s
mechanism is new and needs to be run up/down a few times to
loosen up. If this happens, carefully with a little force yank the screen straight down to unlock
the screen.
Note: Imp
roperly bringing the screen up/down will damage the screen material or rolling
system.
4.4 Maintenance

Clean matte white screen material with a soft cloth and mild soap with water.

When not in use, retract screen in its housing to keep the screen material
NOTE:
Regardless of mounting method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer must
insure that the fasteners used are of adequate strengt
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens
China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
pull the screen down or let it up in a 90
-
degree vertical angle. Do not allow the
screen to touch the screen case when the screen goes up or comes down to avoid damaging the
1. Pull the screen down from the lanyard or from
degree angle. Do not attempt
to pull the screen down by the surface or touch the
screen, as it will damage the screen and void the
lock mechanism system will
cause the screen to stop and lock on the p
osition at intervals.
2. If you want to the screen to retract back, simply pull the
screen down more than 2 inches and retract the screen back by
quickly and smoothly releasing it up gently.
The screen is
SLOW RETRACT MECHANISM
(SRM)
which allows the screen to slowly retract without the need to hold
on to the handle or lanyard. Simply release the handle and the
degree angle and do not let go
ide the case
If ever the screen feels stuck, keep in mind that the screen’s
mechanism is new and needs to be run up/down a few times to
loosen up. If this happens, carefully with a little force yank the screen straight down to unlock
roperly bringing the screen up/down will damage the screen material or rolling
Clean matte white screen material with a soft cloth and mild soap with water.
When not in use, retract screen in its housing to keep the screen material
Regardless of mounting method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer must
insure that the fasteners used are of adequate strengt
h and suitable for the mounting surface chosen.
China Ltd.
degree vertical angle. Do not allow the
screen to touch the screen case when the screen goes up or comes down to avoid damaging the
loosen up. If this happens, carefully with a little force yank the screen straight down to unlock
roperly bringing the screen up/down will damage the screen material or rolling
Clean matte white screen material with a soft cloth and mild soap with water.
When not in use, retract screen in its housing to keep the screen material
surface clean.
Regardless of mounting method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer must
h and suitable for the mounting surface chosen.