User Manual

11
CO
Screw a standard tripod into the screw hole on the projector.
*Note:
Tripod should support loading above 3Kg, and mounting screw spec is 1/4”
1. Loosen 4 screws metal plate from MosicGO
®
.
2. Fasten screws
to ceiling mount kits.
Screw hole for tripod
*Standard Tripod
Mount on ceilingMount on tripod
M4 Screw
( x 4 )
MOUNT THE PROJECTOR
Note2
Keep enough space from speakers and ventilations (30 cm above)
On table
4 rubber feet are placed on flat surface.
Prevent to block bottom’s ventilations.
Note1
table
table
*Note:
Please keep air vents opend for heat ventilation. Otherwise, projector will be turned off if it's over heat.
for more update user manual:
Electronic file link
www.eliteprojector.com/MGFU/manual
www.eliteprojector.com
Printed in T aiw a n
FBZZ-MG1Z002-05