Specification Sheet

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.

Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia

Synchronizing the Control to the Yard Master Electric Screen

1. Unplug the power source from the Elite Electric Screen.

2. Press and HOLD the STOP Button. (See diagram above)

3. White holding the STOP button, plug the screen back into the power outlet.

a. Should hear a single “beep” when plugging the screen in.

4. After you hear a set of multiple “beeps”, release the STOP button.

5. You should now be able to control your electric screen with the RF remote control.

If unsuccessful repeat from Step 1.

Note: The beep(s) the screen produces is very faint. It may be difficult to hear, if more than 5

feet away from the screen.

4.8 Magnetic bottom bracket Installation

1. After the screen is plugged in to a power outlet, press the DOWN button on the RF remote

control (F).Install the magnetic bottom bracket (G) so that the weight bar sleeve cradles

inside (see picture below).

Note: The screen should deploy straight down and align with the magnetic bottom bracket

(G). Once the weight bar is cradled inside the magnetic bracket, the screen will be from

movement.